CORROSION RESISTANCE
Continuous fiberglass strand is thoroughly soaked with premium grade polyester resin
which gives Redco™ FRP Grating excellent corrosion resistance over a wide PH range
– both acidic and caustic.
Please click here to view CHEMICAL RESISTANCE Charts.

GREATER TENSILE STRENGTH
Alternating layers and integral one-piece construction distributes loads to both bearing
bars and cross bars for greater tensile strength.

IMPACT RESISTANT
The impact resistance of Redco™ FRP Grating allows repeated deflections of the grating
without permanent deformation unlike metallic grating which will remain deformed
and require replacement.
Please click here to view LOAD BEARING Charts.

FIRE RESISTANT
Redco™ FRP Grating has a Class 1 ASTM E-84 flame spread rating of 25 or less as
per ASTM E-84 tunnel test.
Please click here to view PHYSICAL/THERMAL/ELECTRICAL PROPERTIES.

NON-CONDUCTIVE
Excellent non-conductive properties make Redco™ FRP Grating ideally suited for work
platforms and flooring in electrically hazardous locations. Redco™ FRP Grating acts as
an insulator to greatly reduce the risk of electrical shock for workers in bus areas and
around switch gears.
Please click here to view PHYSICAL/THERMAL/ELECTRICAL PROPERTIES.

SLIP RESISTANCE
The slip resistance feature of Redco™ FRP Grating is created during the molding process.
A grit surface is also available.

NON-MAGNETIC
Non-magnetic properties allow Redco™ FRP Grating to be used in sensitive installations
where the inherent magnetic properties of metallic grating would prove harmful.

MAINTENANCE FREE
Maintenance free from painting and/or coating of Redco™ FRP Grating is achieved, not
only by the inherent corrosion/rust resistance, but also because the grating is molded
in the desired color with added ultraviolet resistance.
Please click here to learn more about INSTALLATION & FABRICATION.

NON-SPARKING
Redco™ FRP Grating is ideally suited for those installations where hydrogen or
other combustible gases may be present and which may explode or cause a
fire from sparks produced by the accidental dropping of tools onto the grating.

EASY INSTALLATION
Redco™ FRP Grating also reduces installation and fabrication costs.
Redco™ FRP Grating weighs about one-fourth as much as steel grating, full panels
can be easily handled by two men without the need for hoists, pulleys or dollies.

ANTI-FATIGUE
Redco™ FRP Grating has a slight built-in resiliency, workers standing on it for
lengthy periods of time actually experience less fatigue than if they were
working on solid, unyielding surfaces such as concrete or steel. After installing
Redco™ FRP Grating, many companies have experienced a dramatic decrease in
worker fatigue and an increase in productivity.

MINI MESH FIBERGLASS GRATING
A smaller mesh pattern to prevent wheels or objects falling through the grid.
Applications include; wheelchair and scooter ramps, suitcase ramps and dock walkways.

FLOWGRIP™ FIBERGLASS FLOORING SYSTEM
Available with open solid grating, with non-skid top surface and with or without anti-skid textures.
One piece construction eliminates the need for panel clip joints.

SUPERGRATE™ FIBERGLASS GRATING PANELS
Reinforced with T-Bar and I-Bar profiles.

TOP

A large variety of FRP profiles are available to complete the grating panels installation:
handrail, structural system, support, etc.

Many profiles are available, such as:

Lighter than aluminum, FRP profiles are non-conductive, corrosion resistant and require low maintenance.
Polyester and Vinylester varieties are available.
Please click here to view PROFILE DIMENSIONS & AVAILABLE PROFILES.

TOP

  • CHEMICAL RESISTANCE CHARTS

  • PHYSICAL/THERMAL & ELECTRICAL PROPERTIES

  • MSDS